IMPA STORES "DRILL H.S.S. STRAIGHT SHANK, TWIST 1.0MM, THE DRILLS 

ARE OF THE CORRECTIONAL TWO-FLUTE DESIGN WITH 

HELIX ANGLES, FLUTE AND POINT SHAPES SELECTED 

FOR GENERAL PURPOSE APPLICATIONS. THEY MAY BE 

USED VERY SUCCESSFULLY IN CAST IRON, STEEL 

FORGING AND OTHER MATERIALS" NA.NA.630108

IMPA STORES DRILL H.S.S. STRAIGHT SHANK, TWIST 1.5MM NA.NA.630113

IMPA STORES DRILL BITS (2 MM) NA.NA.630118

IMPA STORES "DRILL H.S.S. STRAIGHT SHANK, TWIST 2.3MM, THE DRILLS 

ARE OF THE CORRECTIONAL TWO-FLUTE DESIGN WITH 

HELIX ANGLES, FLUTE AND POINT SHAPES SELECTED 

FOR GENERAL PURPOSE APPLICATIONS. THEY MAY BE 

USED VERY SUCCESSFULLY IN CAST IRON, STEEL 

FORGING AND OTHER MATERIALS." NA.NA.630121

IMPA STORES "DRILLS STRAIGHT SHANK TWIST

DRILL H.S.S. STRAIGHT SHANK, TWIST 2.5MM " NA.NA.630123

IMPA STORES 电钻钻头 NA.NA.630128

IMPA STORES DRILL BIT- HSS, 4MM NA.NA.630138

IMPA STORES STRAIGHT SHANK TWIST DRILLS NA.NA.630140

IMPA STORES STRAIGHT SHANK TWIST DRILLS NA.NA.630148

IMPA STORES Straight shank twist drill, size dia-5.0, 5.5, 6.0, 6.5, 7.0, 7.5 & 8.0 NA.NA.630163

IMPA STORES DRILL H.S.S. STRAIGHT SHANK, TWIST 6.7MM, Ordered from catalog IMPA: 630165 NA.NA.630165

IMPA STORES DRILL BIT- HSS, 8.5MM NA.NA.630183

IMPA STORES DRILL BIT- HSS, 10.5MM NA.NA.630199

IMPA STORES Straight shank twist drill sets,high speed steel,range of size 1.5mm-6.5mm,set contents 13's, NA.NA.630253

IMPA STORES DRILL SET HSS STRAIGHT SHANK1-13MM 25PCS WHITE DRILL NA.NA.630255

IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 13.5MM NA.NA.630308

IMPA STORES MORSE TAPER SHANK TWIST DRILL HSS 14.0mm NA.NA.630309

IMPA STORES DRILL H.S.S. MORSE TAPER SHANK TWIST 14.5MM NA.NA.630310

IMPA STORES MORSE TAPER SHANK TWIST DRILL HSS 15.0mm NA.NA.630311

IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 15.5MM NA.NA.630312

IMPA STORES MORSE TAPER SHANK TWIST DRILL HSS 16.0mm NA.NA.630313

IMPA STORES DRILL H.S.S. MORSE TAPER SHANK TWIST 16.5MM NA.NA.630314

IMPA STORES MORSE TAPER SHANK TWIST DRILL HSS 17.0mm NA.NA.630315

IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 17.5MM NA.NA.630316

IMPA STORES MORSE TAPER SHANK TWIST DRILL HSS 18.0mm NA.NA.630317

IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 18.5MM NA.NA.630318

IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 19MM NA.NA.630319

IMPA STORES MORSE TAPER SHANK TWIST DRILLS, HIGH SPEED STEEL, DIA. 19.5MM NA.NA.630320

IMPA STORES DRILL H.S.S. MORSE TAPER SHANK, TWIST 20.0MM NA.NA.630321

IMPA STORES DRILL H.S.S. MORSETYPESHANKTWIST 20.5MM NA.NA.630322

IMPA STORES MORSE TAPER SHANK TWIST DRILLS, 21MM NA.NA.630323

IMPA STORES DRILL H.S.S. MORSETYPESHANKTWIST 21.5MM NA.NA.630324

IMPA STORES MORSE TAPER SHANK TWIST DRILLS, 22MM NA.NA.630325

IMPA STORES DRILL H.S.S. MORSE TAPER SHANK, TWIST 23.0MM NA.NA.630327

IMPA STORES DRILL H.S.S. MORSETYPESHANKTWIST 24.0MM NA.NA.630329

IMPA STORES DRILL H.S.S. MORSETYPESHANKTWIST 25.0MM NA.NA.630331

IMPA STORES DRILL H.S.S. MORSETYPESHANKTWIST 26.0MM NA.NA.630333

IMPA STORES 630337 DRILL H.S.S. MORSE TAPER SHANK TWIST 28.0MM NA.NA.630337

IMPA STORES MORSE TAPER SHANK TWIST DRILLS NA.NA.630341

IMPA STORES DRILL H.S.S. MORSE TAPER SHANKTWIST 32MM****WERKO GERMANY*** NA.NA.630345

IMPA STORES CENTER DRILLS A-TYPE NA.NA.630503

IMPA STORES Center drills, A TYPE,drill diam 4.0mm,body diam 10mm,angle 60 deg. NA.NA.630506

IMPA STORES STEP DRILLS 4-20MM NA.NA.633802

IMPA STORES STEP DRILLS 6-42MM NA.NA.633804

IMPA STORES TAP HAND METRIC COARSE, M3.0XP0.50MM 3'S CARBON STEEL NA.NA.631013

IMPA STORES TAP HAND METRIC COARSE, M4.0XP0.70MM 3'S CARBON STEEL NA.NA.631015

IMPA STORES Matric coarse thread hand tap 3’s/Set( M→5, M→6, M→12) NA.NA.631017

IMPA STORES Matric coarse thread hand tap 3’s/Set( M→5, M→6, M→12) NA.NA.631018

IMPA STORES HAND TAP,METRIC COARSE,CARBON STEEL,M8.0,PITCH 1.25MM,3'S/SET NA.NA.631020

IMPA STORES METRIC COARSE THREAD HAND TAPS,  HIGH SPEED STEEL, 3'S/SET, M10 NA.NA.631022

IMPA STORES Matric coarse thread hand tap 3’s/Set( M→5, M→6, M→12) NA.NA.631024

IMPA STORES METRIC COARSE THREAD HAND TAPS,  HIGH SPEED STEEL, 3'S/SET, M14 NA.NA.631025

IMPA STORES M16X2 METRIC COARSE THREAD HAND TAP,3'S SET NA.NA.631026

IMPA STORES METRIC COARSE THREAD HAND TAPS,  HIGH SPEED STEEL, 3'S/SET, M18 NA.NA.631027

IMPA STORES METRIC COARSE THREAD HAND TAPS,  HIGH SPEED STEEL, 3'S/SET, M20 NA.NA.631028

IMPA STORES METRIC COARSE THREAD HAND TAPS,  HIGH SPEED STEEL, 3'S/SET, M22 NA.NA.631029

IMPA STORES METRIC COARSE THREAD HAND TAPS,  HIGH SPEED STEEL, 3'S/SET, M24 NA.NA.631030

IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3'S/SET, M10 NA.NA.631123

IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3'S/SET, M12 NA.NA.631127

IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3'S/SET, M12 NA.NA.631128

IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3'S/SET, M14 NA.NA.631130

IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3'S/SET, M16 NA.NA.631134

IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3'S/SET, M18 NA.NA.631139

IMPA STORES METRIC FINE THREAD HAND TAPS, HIGH SPEED STEEL, 3'S/SET, M20 NA.NA.631142

IMPA STORES TAP HAND METRIC FINE          M22X1.5MM 3'S CARBON STEEL ****** NEUBRO NA.NA.631145

IMPA STORES TAP HAND METRIC FINE          M24X1.5MM 3'S CARBON STEEL****SKE JAPAN**** NA.NA.631148

IMPA STORES "TAP STRAIGHT FOR STRAIGHT PIPE, THREAD G1/8X28T 

HSS" NA.NA.631452

IMPA STORES "TAP STRAIGHT FOR STRAIGHT PIPE, THREAD G1/4X19T 

HSS," NA.NA.631453

IMPA STORES "TAP STRAIGHT FOR STRAIGHT PIPE, THREAD G3/8X19T 

HSS" NA.NA.631454

IMPA STORES 631455 TAP STRAIGHT FOR STRAIGHT PIPE THREAD G1/2X14T HIGH SPEED STL ` NA.NA.631455

IMPA STORES 631457 TAP STRAIGHT FOR STRAIGHT PIPE THREAD G3/4X14T HIGH SPEED STL NA.NA.631457

IMPA STORES "TAP STRAIGHT FOR STRAIGHT PIPE, THREAD G1X11T 

HIGH SPEED STEEL" NA.NA.631459

IMPA STORES "TAP STRAIGHT FOR STRAIGHT PIPE, THREAD G1-1/4X11T 

HSS" NA.NA.631461

IMPA STORES TAP STRAIGHT FOR STRAIGHT PIPE THREAD G1-1/2×11THREAD SKH NA.NA.631462

IMPA STORES METRIC COARSE THREAD DIES NA.NA.631713

IMPA STORES METRIC COARSE THREAD DIES NA.NA.631715

IMPA STORES METRIC COARSE THREAD DIES NA.NA.631717

IMPA STORES ELBOW STEEL 90DEG 3/8 THREADED, FOR H.P. PIPE FITTING NA.NA.731718

IMPA STORES ELBOW STEEL 90DEG 3/4 THREADED ; FOR H.P. PIPE FITTING;IMPA Catalogue NA.NA.731720

IMPA STORES "ELBOW STEEL 90DEG 1-1/4, THREADED FOR H.P. PIPE 

FITTING, HIGH PRESSURE, DROP FORGED STEEL, 

UNGALVANIZED (BLACK) PIPE FITTINGS WITH A 

PRESSURE RATING OF 210 KGF/CM2 AT 120OC. THREADS 

CONFORM TO THE TAPER PIPE THREADS STANDARDS OF 

JIS B 0203 AND THE ISO 7/1. LARGER SIZES AND TYPES 

OF FITTINGS NOT LISTED BELOW ARE ALSO AVAILABLE." NA.NA.731722

IMPA STORES ELBOW STEEL 90DEG 2 THREADED, FOR H.P. PIPE FITTING NA.NA.731724

IMPA STORES "ELBOW STEEL 90DEG 2-1/2, THREADED FOR H.P. PIPE 

FITTING, HIGH PRESSURE, DROP FORGED STEEL, 

UNGALVANIZED (BLACK) PIPE FITTINGS WITH A 

PRESSURE RATING OF 210 KGF/CM2 AT 120OC. THREADS 

CONFORM TO THE TAPER PIPE THREADS STANDARDS OF 

JIS B 0203 AND THE ISO 7/1. LARGER SIZES AND TYPES 

OF FITTINGS NOT LISTED BELOW ARE ALSO AVAILABLE." NA.NA.731725

IMPA STORES "ELBOW STEEL 90DEG 3 THREADED, FOR H.P. PIPE 

FITTING, HIGH PRESSURE, DROP FORGED STEEL, 

UNGALVANIZED (BLACK) PIPE FITTINGS WITH A 

PRESSURE RATING OF 210 KGF/CM2 AT 120OC. THREADS CONFORM TO THE TAPER PIPE THREADS STANDARDS OF 

JIS B 0203 AND THE ISO 7/1. LARGER SIZES AND TYPES 

OF FITTINGS NOT LISTED BELOW ARE ALSO AVAILABLE." NA.NA.731726

IMPA STORES ELBOW STEEL 90DEG 1 FOR H.P. PIPE FITTING NA.NA.731721

IMPA STORES METRIC COARSE THREAD DIES, CARBON STEEL, M20 NA.NA.631728

IMPA STORES METRIC COARSE THREAD DIES, CARBON STEEL, M22 NA.NA.631729

IMPA STORES METRIC COARSE THREAD DIES, CARBON STEEL, M24 NA.NA.631730

IMPA STORES METRIC COARSE THREAD DIES, CARBON STEEL, M18 NA.NA.631727

IMPA STORES "DIE ROUND ADJ METRIC FINE, M3XP0.35XOD20MM 

CARBON STEEL, THESE ROUND ADJUSTABLE DIES ARE 

USED IN EITHER HAND STOCK HOLDERS OR MACHINE 

HOLDERS. THESE DIES CAN BE ADJUSTED BY TURNING A 

SMALL SET SCREW WHICH WILL CHANGE THE NOMINAL 

SIZE OF THE DIES GIVING THEM A TIGHT OR LOOSE FIT 

TO THE THREADS. MOST COMMONLY MADE OF CARBON 

STEEL, BUT HIGH SPEED STEEL THREADS ARE ALSO 

AVAILABLE." NA.NA.631810

IMPA STORES Metric fine thread dies M5x0,5 mm NA.NA.631814

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M6 NA.NA.631816

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M8 NA.NA.631818

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M8 NA.NA.631819

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M10 NA.NA.631822

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M10 NA.NA.631823

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M10 NA.NA.631824

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M12 NA.NA.631827

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M12 NA.NA.631828

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M12 NA.NA.631829

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M14 NA.NA.631830

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M14 NA.NA.631831

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M15 NA.NA.631832

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M16 NA.NA.631834

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M16 NA.NA.631835

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M18 NA.NA.631838

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M18 NA.NA.631839

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M18 NA.NA.631840

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M20 NA.NA.631841

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M20 NA.NA.631842

IMPA STORES METRIC FINE THREAD DIES, CARBON STEEL, M20 NA.NA.631843

IMPA STORES METRIC FINE THREAD DIES NA.NA.631844

IMPA STORES DIE ROUND ADJ METRIC FINE     M22XP1.5XOD50MM CARBON STEEL ****** NEUBRO NA.NA.631845

IMPA STORES "DIE ROUND ADJ METRIC FINE, M22XP1XOD50MM CARBON 

STEEL, THESE ROUND ADJUSTABLE DIES ARE USED IN 

EITHER HAND STOCK HOLDERS OR MACHINE HOLDERS. 

THESE DIES CAN BE ADJUSTED BY TURNING A SMALL SET 

SCREW WHICH WILL CHANGE THE NOMINAL SIZE OF THE 

DIES GIVING THEM A TIGHT OR LOOSE FIT TO THE 

THREADS. MOST COMMONLY MADE OF CARBON STEEL, 

BUT HIGH SPEED STEEL THREADS ARE ALSO AVAILABLE." NA.NA.631846

IMPA STORES "DIES ADJUSTABLE ROUND PIPE THREAD

DIE ROUND ADJ STRAIGHT THREAD, PF1/16X28TX38MM

CARBON STEEL " NA.NA.632001

IMPA STORES DIE ROUND PIPE THREAD STRAIGHT ADJ PF1/8×28THREAD×38MM SKS NA.NA.632002

IMPA STORES DIE ROUND ADJ STRAIGHT THREAD, PF1/4X19TX38MM CARBON STEEL NA.NA.632003

IMPA STORES DIE ROUND ADJ STRAIGHT THREAD, PF3/8X19TX50MM CARBON STEEL NA.NA.632004

IMPA STORES DIE ROUND ADJ STRAIGHT THREAD, PF1/2X14TX50MM CARBON STEEL NA.NA.632005

IMPA STORES "DIE ROUND ADJ STRAIGHT THREAD, PF5/8X14TX63MM 

CARBON STEEL" NA.NA.632006

IMPA STORES DIE ROUND ADJ STRAIGHT THREAD, PF3/4X14TX63MMCARBON STEEL NA.NA.632007

IMPA STORES "DIE ROUND ADJ STRAIGHT THREAD, PF7/8X14TX75MM 

CARBON STEEL" NA.NA.632008

IMPA STORES DIE ROUND PIPE THREAD STRAIGHT ADJ PF1×11THREAD×75MM SKS NA.NA.632009

IMPA STORES "DIE ROUND ADJ STRAIGHT THREAD, PF1-1/8X11TX75MM 

CARBON STEE" NA.NA.632010

IMPA STORES ADJUSTABLE ROUND DIES FOR PIPE THREADS NA.NA.632011

IMPA STORES DIE ROUND ADJ STRAIGHT THREAD, PF1-1/2X11TX90MM CARBON STEEL Cat name:IMPA. Cat no:632012. DIE ROUND ADJ STRAIGHT THREAD, PF1-1/2X11TX90MM CARBON STEEL NA.NA.632012

IMPA STORES "DIE ROUND ADJ STRAIGHT THREAD, PF1-3/4X11TX105MM 

CARBON STEEL" NA.NA.632013

IMPA STORES "DIE ROUND ADJ STRAIGHT THREAD, PF2X11TX105MM 

CARBON STEEL" NA.NA.632014

IMPA STORES SCREW PLATE SETS  OK 47 NA.NA.632203

IMPA STORES "SCREW PLATE SET METRIC COARSE, #F48 M3 TO M10 18PCS/SET, Ordered from catalog IMPA: 632210

These sets are designed for cutting threads of a variety of sizes, easily, and all with one set. Suitable for jobs involving a wide range of on site threading work.  There are single tap or three tap sets available in the same thread cutting range.  When ordering, please specify the set number, thread cutting range, and thread type, (whitworth, metric, etc.), by indicating the exact code number." NA.NA.632210

IMPA STORES "SCREW PLATE SET UNIFIED COARSE, #OK37 1/4 TO 1 

20PCS/SET, THESE SETS ARE DESIGNED FOR CUTTING 

THREADS OF A VARIETY OF SIZES, EASILY, AND ALL WITH 

ONE SET. SUITABLE FOR JOBS INVOLVING A WIDE RANGE 

OF ON SITE THREADING WORK. THERE ARE SINGLE TAP 

OR THREE TAP SETS AVAILABLE IN THE SAME THREAD 

CUTTING RANGE. WHEN ORDERING, PLEASE SPECIFY 

THE SET NUMBER, THREAD CUTTING RANGE, AND 

THREAD TYPE, (WHITWORTH, METRIC, ETC.), BY

INDICATING THE EXACT CODE NUMBER" NA.NA.632224

IMPA STORES SCREW PLATE SET PIPE THREAD   1/8 TO 1-1/4 22PCS/SET (WHITWORTH)***THREAD #R4 NA.NA.632254

IMPA STORES WRENCH TAP,STRAIGHT TYPE,NOMINAL SIZE 6 FOR M1-M6****No0,SKC JAPAN***** NA.NA.633401

IMPA STORES WRENCH TAP STRAIGHT TYPE FOR M1-10 200MM NA.NA.633402

IMPA STORES TAP WRENCHES, STRAIGHT, NOMINAL SIZE - 20MM NA.NA.633404

IMPA STORES WRENCH TAP T-TYPE FOR M5-10 NA.NA.633413

IMPA STORES DIE STOCK FOR 16mm O.D.ROUND DIE****SKC JAPAN**** NA.NA.633421

IMPA STORES ROUND DIE STOCKS, 20MM NA.NA.633422

IMPA STORES ROUND DIE STOCKS, 38MM NA.NA.633424

IMPA STORES ROUND DIE STOCKS, 50MM NA.NA.633425

IMPA STORES "STOCK FOR ROUND DIE 57MM, Ordered from catalog IMPA: 633426

Adjustable round die stocks.  Made of steel.  Select suitable diameter of stock to fit your round dies." NA.NA.633426

IMPA STORES "LATHE DOG CAST-IRON BENT 38MM, BODY IS MADE OF 

CAST IRON AND THE SQUARE HEAD SCREW OF 

HARDENED STEEL. THE OPENING IS MACHINED WITH THE 

FACE AT A RIGHT ANGLE. PLEASE INDICATE STRAIGHT

OR BENT TAIL WHEN ORDERING." NA.NA.632320

IMPA STORES "LATHE DOG CAST-IRON BENT 50MM, BODY IS MADE OF 

CAST IRON AND THE SQUARE HEAD SCREW OF 

HARDENED STEEL. THE OPENING IS MACHINED WITH THE 

FACE AT A RIGHT ANGLE. PLEASE INDICATE STRAIGHT

OR BENT TAIL WHEN ORDERING" NA.NA.632322

IMPA STORES "LATHE DOG CAST-IRON BENT 75MM, BODY IS MADE OF 

CAST IRON AND THE SQUARE HEAD SCREW OF 

HARDENED STEEL. THE OPENING IS MACHINED WITH THE 

FACE AT A RIGHT ANGLE. PLEASE INDICATE STRAIGHT

OR BENT TAIL WHEN ORDERING." NA.NA.632324

IMPA STORES DRILL CHUCKS WITH KEY 16.0MM NA.NA.632340

IMPA STORES 632352 DRILL SLEEVE MT#1X3 NA.NA.632352

IMPA STORES DRILL SLEEVE MT#2X3 NA.NA.632353

IMPA STORES Drill sleeves,MT 2x4,hole 2, overall length 124mm NA.NA.632354

IMPA STORES DRILL SOCKET FOR MORSE TAPER, MT#1X2 NA.NA.632362

IMPA STORES HEXAGON HEAD BOLTS WITH NUTS STAINLESS  STEEL , M10X55 NA.NA.632364

IMPA STORES MORSE TAPER SHANK DRILL SOCKETS NA.NA.632365

IMPA STORES DRILL CHUCK ARBOR, Nominal No. 3 x 2, J.T. No. 3, M.T. No. 2, Overall Length-120 mm. NA.NA.632384

IMPA STORES "DRILL CHUCK ARBOR JT#1XMT#3, FOR USE WITH 

DRILLING MACHINES, LATHES, ETC. WHEN ORDERING, 

PLEASE SPECIFY NOMINAL NUMBERS." NA.NA.632378

IMPA STORES "DRILL CHUCK ARBOR JT#2XMT#3, FOR USE WITH 

DRILLING MACHINES, LATHES, ETC. WHEN ORDERING, 

PLEASE SPECIFY NOMINAL NUMBERS." NA.NA.632381

IMPA STORES "DRILL DRIFT ORDINARY #3 FOR, SOCKET & SLEEVE #3, 

FOR REMOVING TAPER SHANKS WITHOUT ANY DAMAGE 

FROM DRILL SOCKETS OR DRILLING MACHINES. THIS 

IMPROVED TYPE WORKS MORE EFFICIENTLY AND IS 

SAFER." NA.NA.632393

IMPA STORES "LATHE CENTER H.S.S. TIPPED, MT#2, BODY IS MADE OF 

TOOL STEEL WITH A HIGH SPEED STEEL TIP OR A 

CARBIDE TIP. BOTH TYPES OF TIP ENDS ARE PROPERLY 

HARDENED. THE SHANK IS GROUND TO MORSE TAPERS 

AND THE INCLUDED ANGLE OF THE POINT IS 60O." NA.NA.632403

IMPA STORES "LATHE CENTER H.S.S. TIPPED, MT#3, BODY IS MADE OF 

TOOL STEEL WITH A HIGH SPEED STEEL TIP OR A 

CARBIDE TIP. BOTH TYPES OF TIP ENDS ARE PROPERLY 

HARDENED. THE SHANK IS GROUND TO MORSE TAPERS 

AND THE INCLUDED ANGLE OF THE POINT IS 60O." NA.NA.632404

IMPA STORES ROLLING CENTER MT#3 60DEG NA.NA.632423

IMPA STORES "ROLLING CENTER MT#4 60DEG, SPECIALLY DESIGNED TO 

WITHSTAND HIGH-SPEED HEAVY-DUTY OPERATIONS. 

INCORPORATED ARE A TAPER ROLLER BEARING, THRUST 

BALL BEARING, BALL BEARING AND OTHER SPECIAL 

BEARINGS." NA.NA.632424

IMPA STORES "LIVE CENTER S-TYPE MT#4 195MM, THIS S TYPE IS 

RECOMMENDED FOR USE ON PRECISION FINISHING 

WORK WITH HIGH SPEED REVOLUTION." NA.NA.632433

IMPA STORES "ROLLING CENTER BEVEL MT#2, 70DEG BEVEL DIAM 

12X62MM, USED IN COMBINATION WITH A LATHE OR AN 

EXTERNAL GRINDING MACHINE, THE BEVEL ROLLING 

CENTER SERVES AS A CENTER PUSHER FOR STEEL PIPE 

OR A WORKPIECE WITH A LARGE CENTRAL OPENING AND 

WITHOUT A CENTERING HOLE." NA.NA.632441

IMPA STORES EXTRACTOR SCREW SET 6'S FOR DRILL SIZE 2-10.3MM NA.NA.632487

IMPA STORES "ROTARY BAR CARBIDE TYPE-A 3MM SHANK/3MM

BLADE" NA.NA.632501

IMPA STORES "ROTARY BAR CARBIDE TYPE-A 6MM SHANK/4MM

BLADE" NA.NA.632502

IMPA STORES Rotary bur,carbide, TYPE-A, cylindrical flat end type,shank 6mm diam,blade 6mm diam,overall length 55mm NA.NA.632503

IMPA STORES ROTARY BUR CARBIDE TYPE-A, 6MM SHANK/8MM BLADE NA.NA.632504

IMPA STORES ROTARY BAR CARBIDE TYPE-A 6MM SHANK /9MM BLADE NA.NA.632505

IMPA STORES Rotary bur,carbide, Type-A, cylindrical flat end type,shank 6mm diam,blade 13mm diam,overall length 70mm NA.NA.632506

IMPA STORES ROTARY BAR CARBIDE TYPE-B, 3MM SHANK/3MM BLADE NA.NA.632511

IMPA STORES ROTARY BAR CARBIDE TYPE-B, 6MM SHANK/4MM BLADE NA.NA.632512

IMPA STORES CARBIDE ROTARY BURS; CYLINDRICAL RADIUS END; 6MM NA.NA.632513

IMPA STORES ROTARY BUR，CARBIDE，TYPE CYLINDER RADIUS END NA.NA.632514

IMPA STORES CARBIDE ROTARY BUR NA.NA.632515

IMPA STORES "ROTARY BAR CARBIDE TYPE-B 6MM SHANK/13MM

BLADE 16HELICAL" NA.NA.632516

IMPA STORES "ROTARY BUR CARBIDE TYPE-B, 6MM SHANK/13MM BLADE 

32HELICAL, DESIGNED FOR THE EFFICIENT BEVELLING OF 

GEARS, BURRING, PLANING, SHAPING, AND MILLING. 

THESE ROTARY BURS ARE ADVANTAGEOUS FOR USE 

WITH PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR 

MORE. PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE 

AND THE SHANK WHEN ORDERING." NA.NA.632517

IMPA STORES "ROTARY BUR CARBIDE TYPE-C, 3MM SHANK/3MM BLADE, 

DESIGNED FOR THE EFFICIENT BEVELLING OF GEARS, 

BURRING, PLANING, SHAPING, AND MILLING. THESE 

ROTARY BURS ARE ADVANTAGEOUS FOR USE WITH 

PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR MORE. 

PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE AND THE 

SHANK WHEN ORDERING." NA.NA.632521

IMPA STORES ROTARY BAR CARBIDE TYPE-C ; 6MM SHANK/4MM BLADE；IMPA Catalogue NA.NA.632522

IMPA STORES "ROTARY BUR CARBIDE TYPE-C, 6MM SHANK/8MM BLADE, 

DESIGNED FOR THE EFFICIENT BEVELLING OF GEARS, 

BURRING, PLANING, SHAPING, AND MILLING. THESE 

ROTARY BURS ARE ADVANTAGEOUS FOR USE WITH 

PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR MORE. 

PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE AND THE 

SHANK WHEN ORDERING." NA.NA.632523

IMPA STORES "ROTARY BAR CARBIDE TYPE-C, 6MM

SHANK/9MM BLADE" NA.NA.632524

IMPA STORES "ROTARY BAR CARBIDE TYPE-C 6MM SHANK/13MM

BLADE" NA.NA.632525

IMPA STORES CARBIDE ROTARY BURS; TREE SHAPE 6MM NA.NA.632531

IMPA STORES ROTARY BUR，CARBIDE，TYPE TREE SHAPE RADIUS NA.NA.632532

IMPA STORES ROTARY BUR, CARBIDE, TREE SHAPE RADIUS END, 6 X 8 MM NA.NA.632533

IMPA STORES ROTARY BUR CARBIDE TYPE-D, 6MM SHANK/9MM BLADE NA.NA.632534

IMPA STORES ROTARY BAR CARBIDE TYPE-D, 6MM SHANK/13MM BLADE NA.NA.632535

IMPA STORES ROTARY BAR CARBIDE TYPE-E, 3MM SHANK/3MM BLADE NA.NA.632541

IMPA STORES ROTARY BAR CARBIDE TYPE-E ; 6MM SHANK/4MM BLADE；IMPA Catalogue NA.NA.632542

IMPA STORES ROTARY BAR CARBIDE TYPE-E, 6MM SHANK/6MM BLADE NA.NA.632543

IMPA STORES CARBIDE ROTARY BURS NA.NA.632544

IMPA STORES "ROTARY BAR CARBIDE TYPE-E, 6MM

SHANK/9MM BLADE" NA.NA.632545

IMPA STORES "ROTARY BAR CARBIDE TYPE-E 6MM SHANK/13MM

BLADE 16HELICAL" NA.NA.632546

IMPA STORES "ROTARY BUR CARBIDE TYPE-E, 6MM SHANK/13MM BLADE 

32HELICAL, DESIGNED FOR THE EFFICIENT BEVELLING OF 

GEARS, BURRING, PLANING, SHAPING, AND MILLING. 

THESE ROTARY BURS ARE ADVANTAGEOUS FOR USE 

WITH PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR 

MORE. PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE 

AND THE SHANK WHEN ORDERING." NA.NA.632547

IMPA STORES "ROTARY BUR CARBIDE TYPE-F, 3MM SHANK/3MM BLADE, 

DESIGNED FOR THE EFFICIENT BEVELLING OF GEARS, 

BURRING, PLANING, SHAPING, AND MILLING. THESE 

ROTARY BURS ARE ADVANTAGEOUS FOR USE WITH 

PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR MORE. 

PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE AND THE 

SHANK WHEN ORDERING" NA.NA.632551

IMPA STORES ROTARY BUR, CARBIDE, TYPE: CONE SHAPE RADIUS END(E) & TREE SHAPE POINTED END(F), SHANK DIA-6 mm(both) , BLADE DIA- 8 mm & 4 mm. NA.NA.632552

IMPA STORES "ROTARY BUR CARBIDE TYPE-F, 6MM SHANK/8MM BLADE, 

DESIGNED FOR THE EFFICIENT BEVELLING OF GEARS, 

BURRING, PLANING, SHAPING, AND MILLING. THESE 

ROTARY BURS ARE ADVANTAGEOUS FOR USE WITH 

PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR MORE. 

PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE AND THE 

SHANK WHEN ORDERING." NA.NA.632553

IMPA STORES ROTARY BAR CARBIDE TYPE-G-6MM SHANKJBMM       BLADE NA.NA.632556

IMPA STORES "ROTARY BUR CARBIDE TYPE-G, 6MM SHANK/9MM BLADE, 

DESIGNED FOR THE EFFICIENT BEVELLING OF GEARS, 

BURRING, PLANING, SHAPING, AND MILLING. THESE 

ROTARY BURS ARE ADVANTAGEOUS FOR USE WITH 

PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR MORE. 

PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE AND THE 

SHANK WHEN ORDERING." NA.NA.632557

IMPA STORES "ROTARY BAR CARBIDE TYPE-G 6MM SHANK/13MM

BLADE 16HELICAL" NA.NA.632558

IMPA STORES "ROTARY BUR CARBIDE TYPE-G, 6MM SHANK/13MM BLADE 

32HELICAL, DESIGNED FOR THE EFFICIENT BEVELLING OF 

GEARS, BURRING, PLANING, SHAPING, AND MILLING. 

THESE ROTARY BURS ARE ADVANTAGEOUS FOR USE 

WITH PORTABLE GRINDING TOOLS OF 10,000 R.P.M. OR 

MORE. PLEASE SPECIFY THE TYPE, SIZE OF THE BLADE 

AND THE SHANK WHEN ORDERING." NA.NA.632559

IMPA STORES ROTARY BUR，CARBIDE，TYPE CONE SHAPE NA.NA.632561

IMPA STORES "ROTARY BAR CARBIDE TYPE-H 6MM SHANK/9MM

BLADE" NA.NA.632562

IMPA STORES TOOL BIT RECTANGULAR FLAT HSS 10X16X160MM NA.NA.632621

IMPA STORES TOOL BIT MATERIAL，16X16X300 mm NA.NA.632675

IMPA STORES "TOOL BIT MATERIAL HSS, RECTANGULAR 5X16X300MM, 

HIGH SPEED, STEEL TOOL BIT MATERIAL IS NOT 

HARDENED AS IT IS MADE FOR GENERAL USE. THE 

MATERIAL IS AVAILABLE IN TWO TYPES, SQUARE AND 

RECTANGULAR, TO SUIT THE USERS REQUIREMENTS. 

THESE PLATES ARE SUPPLIED IN 300 MM LENGTH PIECES. 

RECTANGULAR" NA.NA.632686

IMPA STORES "TOOL BIT MATERIAL HSS, RECTANGULAR 3X16X300MM, 

HIGH SPEED, STEEL TOOL BIT MATERIAL IS NOT 

HARDENED AS IT IS MADE FOR GENERAL USE. THE 

MATERIAL IS AVAILABLE IN TWO TYPES, SQUARE AND 

RECTANGULAR, TO SUIT THE USERS REQUIREMENTS. 

THESE PLATES ARE SUPPLIED IN 300 MM LENGTH PIECES. 

RECTANGULAR" NA.NA.632682

IMPA STORES TOOL BIT SINGLE POINT NA.NA.632715

IMPA STORES SINGLE POINT TOOLS NA.NA.632755

IMPA STORES "TOOL WITH CARBIDE TIP SINGLE, #37-3 RIGHT HAND 

19X19X140MM, FOR SQUARE SHANK HOLDERS. THE 

CARBIDE TIPS ARE FINELY GROUND TO BE READY FOR 

USE AND ARE COVERED WITH AN EASY TO REMOVE 

CELLULOSE SHEATH. CHOOSE THE CUTTER MOST 

SUITABLE FOR THE WORK YOU ARE DOING FROM THE 

EXAMPLES BELOW. PLEASE SPECIFY WHETHER YOU 

REQUIRE LEFT OR RIGHT HAND TIPS. MODEL 37 RIGHT" NA.NA.632743

IMPA STORES "TOOLS SINGLE POINT

TOOL WITH CARBIDE TIP SINGLE, #43-1 STRAIGHT 10X16X100MM " NA.NA.632779

IMPA STORES WELDERS GLOVES. 6 PAIRS  *** UNITOR PRODUCT NA.NA.632786

IMPA STORES "TOOL WITH CARBIDE TIP SINGLE, #49-2 RIGHT HAND 

16X16X120MM, FOR SQUARE SHANK HOLDERS. THE 

CARBIDE TIPS ARE FINELY GROUND TO BE READY FOR 

USE AND ARE COVERED WITH AN EASY TO REMOVE 

CELLULOSE SHEATH. CHOOSE THE CUTTER MOST 

SUITABLE FOR THE WORK YOU ARE DOING FROM THE 

EXAMPLES BELOW. PLEASE SPECIFY WHETHER YOU 

REQUIRE LEFT OR RIGHT HAND TIPS. MODEL 49 RIGHT" NA.NA.632804

IMPA STORES "TOOL WITH CARBIDE TIP SINGLE, #51-2 RIGHT HAND 

16X16X160MM, FOR SQUARE SHANK HOLDERS. THE 

CARBIDE TIPS ARE FINELY GROUND TO BE READY FOR 

USE AND ARE COVERED WITH AN EASY TO REMOVE 

CELLULOSE SHEATH. CHOOSE THE CUTTER MOST 

SUITABLE FOR THE WORK YOU ARE DOING FROM THE 

EXAMPLES BELOW. PLEASE SPECIFY WHETHER YOU 

REQUIRE LEFT OR RIGHT HAND TIPS. MODEL 51 RIGHT" NA.NA.632812

IMPA STORES BORING TOOL NA.NA.633052

IMPA STORES TOOL BIT TIP WELDED HSS #41-16 16×16×180MM NA.NA.633057

IMPA STORES TOOL BIT TIP WELDED HSS #42-16 16×16×180MM NA.NA.633062

IMPA STORES HIGH SPEED TIP WELDED,BORING TOOL,MODEL No.51 NA.NA.633067

IMPA STORES "TOOL BITS HIGH SPEED STEEL TIP WELDED - INTERNAL THREADING

TOOL #52;TOOL BIT TIP WELDED HSS, INTERNAL THREAD-16

16X16X180MM " NA.NA.633072

IMPA STORES TOOL BIT HOLDERS NA.NA.633201

IMPA STORES SPRING CUT OFF TOOL HOLDERS NA.NA.633216

IMPA STORES KNURLING TOOL HOLDER NO.1 NA.NA.633241

IMPA STORES "KNURL PITCH 21 STRAIGHT LINE, OD16MM, INDIVIDUALLY 

HOB-CUT FROM EXTRA HIGH CARBON TOOL STEEL, HEAT 

TREATED, TEMPERED AND TESTED TO OBTAIN SHARP, 

PERFECTLY FORMED TEETH IN EVERY KNURL. CAN BE 

FURNISHED IN COARSE, MEDIUM OR FINE GRADE AND IN 

EITHER STRAIGHT LINE OR DIAMOND PATTERN." NA.NA.633252

IMPA STORES KNURL FOR TOOLS (TYPE- DIAMOND PITCH-21) NA.NA.633255

IMPA STORES VALVE SEAT CUTTER, 1"-4" COMPLETE NA.NA.633451